[git commit] ntpd: choose initial FREQHOLD_cnt dynamically
Denys Vlasenko
vda.linux at googlemail.com
Sun Mar 11 16:08:02 UTC 2018
commit: https://git.busybox.net/busybox/commit/?id=448fdcc17df39ac90c59d0588ccaf9ee0400eb7e
branch: https://git.busybox.net/busybox/commit/?id=refs/heads/master
function old new delta
update_local_clock 834 858 +24
Signed-off-by: Denys Vlasenko <vda.linux at googlemail.com>
---
networking/ntpd.c | 66 +++++++++++++++++++++++++++++++++++++++++++++----------
1 file changed, 54 insertions(+), 12 deletions(-)
diff --git a/networking/ntpd.c b/networking/ntpd.c
index 2754170c0..8205ab271 100644
--- a/networking/ntpd.c
+++ b/networking/ntpd.c
@@ -1715,9 +1715,19 @@ update_local_clock(peer_t *p)
tmx.freq = G.discipline_freq_drift * 65536e6;
#endif
tmx.modes = ADJ_OFFSET | ADJ_STATUS | ADJ_TIMECONST;// | ADJ_MAXERROR | ADJ_ESTERROR;
+
+ tmx.offset = (long)(offset * 1000000); /* usec */
+ if (SLEW_THRESHOLD < STEP_THRESHOLD) {
+ if (tmx.offset > (long)(SLEW_THRESHOLD * 1000000)) {
+ tmx.offset = (long)(SLEW_THRESHOLD * 1000000);
+ }
+ if (tmx.offset < -(long)(SLEW_THRESHOLD * 1000000)) {
+ tmx.offset = -(long)(SLEW_THRESHOLD * 1000000);
+ }
+ }
+
tmx.status = STA_PLL;
if (G.FREQHOLD_cnt != 0) {
- G.FREQHOLD_cnt--;
/* man adjtimex on STA_FREQHOLD:
* "Normally adjustments made via ADJ_OFFSET result in dampened
* frequency adjustments also being made.
@@ -1730,6 +1740,48 @@ update_local_clock(peer_t *p)
* If ntpd was restarted due to e.g. switch to another network,
* this destroys already well-established tmx.freq value.
*/
+ if (G.FREQHOLD_cnt < 0) {
+ /* Initialize it */
+// Example: a laptop whose clock runs slower when hibernated,
+// after wake up it still has good tmx.freq, but accumulated ~0.5 sec offset:
+// Run with code where initial G.FREQHOLD_cnt was always 8:
+//15:17:52.947 no valid datapoints, no peer selected
+//15:17:56.515 update from:<IP> offset:+0.485133 delay:0.157762 jitter:0.209310 clock drift:-1.393ppm tc:4
+//15:17:57.719 update from:<IP> offset:+0.483825 delay:0.158070 jitter:0.181159 clock drift:-1.393ppm tc:4
+//15:17:59.925 update from:<IP> offset:+0.479504 delay:0.158147 jitter:0.156657 clock drift:-1.393ppm tc:4
+//15:18:33.322 update from:<IP> offset:+0.428119 delay:0.158317 jitter:0.138071 clock drift:-1.393ppm tc:4
+//15:19:06.718 update from:<IP> offset:+0.376932 delay:0.158276 jitter:0.122075 clock drift:-1.393ppm tc:4
+//15:19:39.114 update from:<IP> offset:+0.327022 delay:0.158384 jitter:0.108538 clock drift:-1.393ppm tc:4
+//15:20:12.715 update from:<IP> offset:+0.275596 delay:0.158297 jitter:0.097292 clock drift:-1.393ppm tc:4
+//15:20:45.111 update from:<IP> offset:+0.225715 delay:0.158271 jitter:0.087841 clock drift:-1.393ppm tc:4
+// If allwed to continue, it would start increasing tmx.freq now.
+// Instead, it was ^Ced, and started anew:
+//15:21:15.043 no valid datapoints, no peer selected
+//15:21:17.408 update from:<IP> offset:+0.175910 delay:0.158314 jitter:0.076683 clock drift:-1.393ppm tc:4
+//15:21:19.774 update from:<IP> offset:+0.171784 delay:0.158401 jitter:0.066436 clock drift:-1.393ppm tc:4
+//15:21:22.140 update from:<IP> offset:+0.171660 delay:0.158592 jitter:0.057536 clock drift:-1.393ppm tc:4
+//15:21:22.140 update from:<IP> offset:+0.167126 delay:0.158507 jitter:0.049792 clock drift:-1.393ppm tc:4
+//15:21:55.696 update from:<IP> offset:+0.115223 delay:0.158277 jitter:0.050240 clock drift:-1.393ppm tc:4
+//15:22:29.093 update from:<IP> offset:+0.068051 delay:0.158243 jitter:0.049405 clock drift:-1.393ppm tc:5
+//15:23:02.490 update from:<IP> offset:+0.051632 delay:0.158215 jitter:0.043545 clock drift:-1.393ppm tc:5
+//15:23:34.726 update from:<IP> offset:+0.039984 delay:0.158157 jitter:0.038106 clock drift:-1.393ppm tc:5
+// STA_FREQHOLD no longer set, started increasing tmx.freq now:
+//15:24:06.961 update from:<IP> offset:+0.030968 delay:0.158190 jitter:0.033306 clock drift:+2.387ppm tc:5
+//15:24:40.357 update from:<IP> offset:+0.023648 delay:0.158211 jitter:0.029072 clock drift:+5.454ppm tc:5
+//15:25:13.774 update from:<IP> offset:+0.018068 delay:0.157660 jitter:0.025288 clock drift:+7.728ppm tc:5
+//15:26:19.173 update from:<IP> offset:+0.010057 delay:0.157969 jitter:0.022255 clock drift:+8.361ppm tc:6
+//15:27:26.602 update from:<IP> offset:+0.006737 delay:0.158103 jitter:0.019316 clock drift:+8.792ppm tc:6
+//15:28:33.030 update from:<IP> offset:+0.004513 delay:0.158294 jitter:0.016765 clock drift:+9.080ppm tc:6
+//15:29:40.617 update from:<IP> offset:+0.002787 delay:0.157745 jitter:0.014543 clock drift:+9.258ppm tc:6
+//15:30:47.045 update from:<IP> offset:+0.001324 delay:0.157709 jitter:0.012594 clock drift:+9.342ppm tc:6
+//15:31:53.473 update from:<IP> offset:+0.000007 delay:0.158142 jitter:0.010922 clock drift:+9.343ppm tc:6
+//15:32:58.902 update from:<IP> offset:-0.000728 delay:0.158222 jitter:0.009454 clock drift:+9.298ppm tc:6
+ /*
+ * This expression would choose 15 in the above example.
+ */
+ G.FREQHOLD_cnt = 8 + ((unsigned)(abs(tmx.offset)) >> 16);
+ }
+ G.FREQHOLD_cnt--;
tmx.status |= STA_FREQHOLD;
}
if (G.ntp_status & LI_PLUSSEC)
@@ -1753,16 +1805,6 @@ update_local_clock(peer_t *p)
if (tmx.constant < 0)
tmx.constant = 0;
- tmx.offset = (long)(offset * 1000000); /* usec */
- if (SLEW_THRESHOLD < STEP_THRESHOLD) {
- if (tmx.offset > (long)(SLEW_THRESHOLD * 1000000)) {
- tmx.offset = (long)(SLEW_THRESHOLD * 1000000);
- }
- if (tmx.offset < -(long)(SLEW_THRESHOLD * 1000000)) {
- tmx.offset = -(long)(SLEW_THRESHOLD * 1000000);
- }
- }
-
//tmx.esterror = (uint32_t)(clock_jitter * 1e6);
//tmx.maxerror = (uint32_t)((sys_rootdelay / 2 + sys_rootdisp) * 1e6);
rc = adjtimex(&tmx);
@@ -2248,7 +2290,7 @@ static NOINLINE void ntp_init(char **argv)
if (BURSTPOLL != 0)
G.poll_exp = BURSTPOLL; /* speeds up initial sync */
G.last_script_run = G.reftime = G.last_update_recv_time = gettime1900d(); /* sets G.cur_time too */
- G.FREQHOLD_cnt = 8;
+ G.FREQHOLD_cnt = -1;
/* Parse options */
peers = NULL;
More information about the busybox-cvs
mailing list