[BusyBox] small PPP implementation?

[Robin Gilks]

Vladimir N. Oleynik wrote:
> Robert,
> 
>>> I havn`t 8xx target, but my pppd-2.4.3 port for IA32
>>> have 106k (with BSS - 137k):
>>> ftp://ftp.simtreas.ru/pub/my/bb/new/pppd.c.gz
> 
> 
>> hmmm ... i'm building a system for an 8xx target as well which
>> includes PPP and, sure enough, a stripped version of the pppd 2.4.3
>> executable (cross-compiled with ELDK 3.1) is right around 262K, so i'm
>> assuming robin and i did pretty much the same thing.
>>
>> i certainly don't see how to get it any smaller.  i just used the
>> "ppc_8xx-strip" executable that comes with ELDK 3.1.
> 
> 
> If to look at the first lines at the specified URL,
> you will see, that I have exclude the opportunities necessary to me,
> it and is half of mine changes.
> Therefore and the size has decreased almost half.
> And I have resulted size for the object module only,
> which uses also some functions from libbb library.
> 

How did you integrate your pppd module into busybox (or at least to use 
the libbb library?). If you have the necessary Makefile handy I'd most 
appreciate it.

-- 
Robin Gilks
Senior Design Engineer          Phone: (+64)(3) 357 1569
Tait Electronics                Fax  :  (+64)(3) 359 4632
PO Box 1645 Christchurch        Email : robin.gilks at tait.co.nz
New Zealand

=======================================================================
This email, including any attachments, is only for the intended
addressee.  It is subject to copyright, is confidential and may be
the subject of legal or other privilege, none of which is waived or
lost by reason of this transmission.
If the receiver is not the intended addressee, please accept our
apologies, notify us by return, delete all copies and perform no
other act on the email.
Unfortunately, we cannot warrant that the email has not been
 altered or corrupted during transmission.
=======================================================================